Valentines print

What a sweet print.

Valentine stickers

Twig & Thistle made these adorable downloadable fruit stickers for Valentine's Day. Alex has a banana for breakfast everyday; I might sneak one on there and see if he notices. :)

Penny Black: Every which way - Love is in the air!

Hello and thanks for stopping by :-)

It's only 1 week to Valentine's Day - which will also mean that February will be half over!!  Boy, time sure does fly, doesn't it?  Anyway, onto my card.......I have still been playing with my new Penny Black: 'Every which way' stamp set - I love this set - it has such c-u-t-e images.  Please excuse the shadow from the ribbon on my photo - popping the card so the sun was right on the front of the card to avoid the ribbon-shadow washed out both the image and dry-embossing, so I went with this photo.

I grabbed my Crafts Too: Happy Valentine embossing folder and popped it through my Cuttlebug.  I really like this folder as you can use it portrait or landscape with the way the pattern has been done - much more practical that way.  I cut out the centre panel just leaving the embossed line, then layered it onto some red cardstock, then cut the middle out of the red cardstock leaving a narrow red border.

I popped a small piece of white cardstock underneath the (now) blank centre panel, and drew a faint pencil line around the centre panel which gave me a guideline as to where I should stamp my image and sentiment to make sure they were in just the right spot.  As these stamps are clear, it also makes things much easier because you can see where to stamp.  I coloured the image with Derwent Coloursoft pencils and OMS, then lightly chalked the sky with Kaiser blue chalk, then added some pink I-Kan-dee pearlescent chalk here and there (alas, not captured by the camera).  I stamped the balloon part of the image again onto the back of some Red Glitter cardstock and cut out the balloon and glued it to the image.    Next, I attached the image panel underneath the blank centre panel, then attached the whole thing to a blank white cardstock front.  I find it easier to do it this way instead of trying to stamp the image on the cardstock front and trying to line everything up perfectly (rather than stamping the image on a separate piece of cardstock) - but that's just me - you might it easier the other way!

I tied a bow with my Bow Easy and glued it on with fabric glue.  One thing that I really love about my Bow Easy is that when I have a ribbon that is patterned and clearly has a wrong side and a right side, when I tie the bow with my Bow Easy, the pattern remains uppermost - something I find difficult to achieve otherwise and it becomes a real fiddle twisting and turning the ribbon to get it right-side up (I am so bow-challenged!).

And I even did the inside (keeping my New Year's resolution of doing the insides of my card before I move onto the next card):-

 

Whoops - one of my little punched hearts is a little crooked!  Oh well!  The scalloped heart was diecut using my Spellbinder Scalloped Heart Nesties and Red Glitter cardstock (LOVE this stuff - can't you tell?!!!) and the pink heart with my Heart Nesties.  For the white cardstock heart:  the next-size-down Heart Nestie is much smaller and when I diecut my white cardstock, it looked a little silly as it made the pink cardstock have a very wide border, so I placed the same Heart Nestie I used to diecut the pink cardstock and traced around the inside of it onto my white cardstock and simply handcut it.  I just use nail scissors (they have a curved blade) which make is easier for cutting the rounded parts.  Then I simply stamped the sentiment and punched a couple of red hearts from my Carl CP-8 Heart duo punch and glued them on.

Challenges:  

I'm popping this card into the following Challenges -

Allsorts Challenge Week 89 - Must be love, love, love

Saturday Challenge #120 - Valentine 

Splitcoaststampers 'Ways to use it' Challenge WT308 of 'i HEART you'

Well, that's about it from me - thanks again for stopping by!  Hope to see you again soon!

Jocelyn

Card Recipe:  

Stamps:  Penny Black 'Every which way' 30-008 clear stamp set

Ink:  Memento Tuxedo black

Designer paper:  Best Creations red glitter cardstock

Accessories:  Cuttlebug, Crafts Too Happy Valentine embossing folder, Spellbinder Heart and Scalloped Heart Nestabilities, Derwent Coloursoft pencils, Odourless Mineral Spirits, paper stumps, Kaisercolour chalk, I-Kan-dee pearlescent chalk, ribbon, Bow Easy, Cardstock:  KW Doggett 'Knight' white (for image), regular white (for card base), candy pink, soft red

Punches:  Carl CP-8 heart duo

Venn diagram posters

So sweet.

(Via the hilarious Nerd Valentine)

Penny Black: Every which way - I will love you always, all ways

 

Hello blogging friends!  My desk has been a little hive of activity since I started playing with my new Penny Black: 'Every which way' stamp set that the postie brought me the other day.  I love this little set - such cute images.  I have long been admiring other people's cards made with Kraft Cardstock and thought I would try my hand at using it.  This was a very quick and simple card to make - perfect for your last-minute Valentines Day cards.

The Kraft cardstock was embossed with my Cuttlebug and Kimmy-Luvs embossing folder.  The dog was stamped onto white cardstock and coloured with OMS, Derwent Coloursoft and Prismacolor pencils.  I stamped the balloon part of the image again onto the back of my Best Creation red glitter cardstock, then cut the balloon out and glued it to the image.  I love how sparkly it looks.  The dog is popped up on 2mm mounts.  It's a good idea to use LOTS of them when you are popping an image onto embossed cardstock so that your image doesn't come unstuck and fall off (ie: less surface area for them to stick to).  I had that happen recently when a sentiment panel came unstuck after a few days when I was very frugal with my foam pads.

Here is closeup pic of the balloon - don't you just love the "sparkle"?!!

By the way, the little hairs and marks on the close-up are part of the cardstock - kinda looks like my card or my camera lens got all dusty!

For the sentiment panels:  as this sentiment is just one stamp and I wanted 2 separate lines, I masked the bottom line of the words off and stamped, then masked the top line off and stamped.  Here is a pic of the stamp set if I am not making sense:

Stamp Set Copyright Penny Black Stamps

I diecut the sentiments using one of the dies from my Spellbinders Tags Trio and popped them up on 1mm mounts.

To finish off, I tied some red and white Twine and punched a heart from the same red glitter cardstock and glued it to the centre.  I did add some Fray Stop to the ends of the twine to stop it from unravelling.  I think you could use this card for a Wedding Anniversary as well as for Valentines Day - and I think it could be used for either a lady or a man.

Challenges:

I am popping this card into the Splitcoaststampers Ways to use it Challenge WT308 of "i HEART you" where you have to use a heart anywhere on your project, as well as the monthly Sir Stampalot February Challenge of "All creatures great and small".

Thanks for stopping by!  I have a couple of other Valentines/Love cards on the go - watch this space!

Jocelyn

Card Recipe:

Stamps:  Penny Black - Every which way 30-008 clear set

Ink:  Memento Tuxedo black

Designer paper:  Best Creation red glitter 12" x 12" cardstock

Accessories:  Cuttlebug, Cuttlebug Kimmy-Luvs embossing folder, Spellbinder Tags Trio S3-147, red and white twine, Fray Stop, Odourless Mineral Spirits (OMS), Prismacolor + Derwent Coloursoft pencils, paper stumps, Cardstock:  American Crafts Kraft, KW Doggett Knight white

Punches:  Carl CP-8 Heart duo, Stampin' Up corner

Valentine's Day countdown

This February, I'd like to share love-themed posts every day until the fourteenth. Anyone with or without a Valentine can come here for some heartfelt Valentiney wishes. :) First up, how sweet is this print, below?
(Photo by Corey Arnold)

Penny Black: It's for you and Nellie Snellen Doily Flower Multiframes

Hi and thanks for visiting my Blog :-)

I couldn't help myself - I had so much fun making my last Circle card, that I made another - except this one I made a top-opening card instead of a side-opening - and of course, it's a Valentine's card!  You can see my first circle card on my post HERE along with the instructions of how to make one. 

This very sweet and totally adorable puss is another Penny Black stamp (you know how much I LOVE my PB's), except that I didn't ink up the envelope portion of the stamp which is on the far left.

Image copyright Penny Black Stamps

I coloured the image with OMS and Derwent Coloursoft pencils, then lightly chalked around the image with blue Kaisercolour chalk, then added some pink I-Kandee Pealescent chalk here and there, and on the card that the cat is holding as well as some red Stickles to the hearts.

The lacey white cardstock was diecut with my Cuttlebug and NEW Nellie Snellen Doily Flower Multiframes (which also contain plain matching circle dies) - I used the biggest doily one on my card - and the image was diecut using one of the matching circles.   The Multiframes are available now at Fat Cat's Card Corner.  The pink cardstock was diecut using one of my Spellbinder Circle Nesties.

Did you notice the embossed texture on the red and pink cardstock?  I ran them both through my Cuttlebug using the Textile embossing folder.  I love how it adds some "lacey-ness" to the card to match the Doily Flower diecut.

The bow was made with my Bow Easy to which I glued a heart brad after cutting off the prongs (much easier than poking a hole to thread the prongs through!).

Now here is a photo of the same card, but with slight differences.  Can you spot them?  No?

Well, I wouldn't expect you to notice, but I ran the white cardstock Flower Lace Doily diecut through my Cuttlebug using the Textile embossing folder instead of the pink cardstock - I just wanted to see what it would look like to have the Lace Doily diecut embossed.  The other difference is that I sewed on a red heart to the ribbon - I couldn't find my red heart buttons when I made the first card (you know how us cardmakers lose stuff on our desk LOL.......!).  I'm not sure which card version I prefer - I like them both!

And here is a pic of both the card insides.  I added some tiny red hearts which are the leftover punchies from using my Arrows Border punch - I added red Stickles to them as well.    The first photo inside matches the first card, and the 2nd photo matches the 2nd card:

Challenges:

I am entering this card into the Penny Black at Allsorts January Challenge of "All you need is love" and they want to see your interpretation of that famous Beatles song.

And the Papertake Weekly Challenge where the first challenge of every month from now on will be "Anything Goes" plus an optional "extra" something  - and this particular Challenge has the optional extra of "Lace" which can be paper lace or fabric - but you don't have to have Lace if you don't want to. 

Thanks again for stopping by!  Thankfully, I seem to have sorted out my computer woes which had my computer in a constant state of re-booting after upgrading a program which corrupted - not fun :-(   Thank goodness for the 'System Restore' feature in Windows XP!!  Takes so much time to "fix" a computer when I would rather be cardmaking!!  Hope to see you again soon!

Jocelyn

Card Recipe:

Stamps:  Penny Black "It's from you" PB-2859J wood-mounted, Sentiment: from Wendy Irving Expressions J6412.02 clear set

Ink:  Memento Tuxedo black

Accessories:  Cuttlebug, Nellie Snellen Doily Flower Multiframes MFD020, Spellbinder Circle Nestabilities, Cuttlebug Textile embossing folder, Odourless Mineral Spirits (OMS), Derwent Coloursoft pencils, paper stumps, Christmas red stickles, Kaisercolour blue chalk, I-Kan-dee Pearlescent chalk, ribbon, Bow Easy, heart brad/button, Cardstock: soft red, pink, KW Doggett "Knight" white

Punches:  EK Success Arrows border