Wedding Dress
Wedding
Showing posts with label Love. Show all posts
Showing posts with label Love. Show all posts

Penny Black: Every which way - Love is in the air!


Hello and thanks for stopping by :-)

It's only 1 week to Valentine's Day - which will also mean that February will be half over!!  Boy, time sure does fly, doesn't it?  Anyway, onto my card.......I have still been playing with my new Penny Black: 'Every which way' stamp set - I love this set - it has such c-u-t-e images.  Please excuse the shadow from the ribbon on my photo - popping the card so the sun was right on the front of the card to avoid the ribbon-shadow washed out both the image and dry-embossing, so I went with this photo.

I grabbed my Crafts Too: Happy Valentine embossing folder and popped it through my Cuttlebug.  I really like this folder as you can use it portrait or landscape with the way the pattern has been done - much more practical that way.  I cut out the centre panel just leaving the embossed line, then layered it onto some red cardstock, then cut the middle out of the red cardstock leaving a narrow red border.

I popped a small piece of white cardstock underneath the (now) blank centre panel, and drew a faint pencil line around the centre panel which gave me a guideline as to where I should stamp my image and sentiment to make sure they were in just the right spot.  As these stamps are clear, it also makes things much easier because you can see where to stamp.  I coloured the image with Derwent Coloursoft pencils and OMS, then lightly chalked the sky with Kaiser blue chalk, then added some pink I-Kan-dee pearlescent chalk here and there (alas, not captured by the camera).  I stamped the balloon part of the image again onto the back of some Red Glitter cardstock and cut out the balloon and glued it to the image.    Next, I attached the image panel underneath the blank centre panel, then attached the whole thing to a blank white cardstock front.  I find it easier to do it this way instead of trying to stamp the image on the cardstock front and trying to line everything up perfectly (rather than stamping the image on a separate piece of cardstock) - but that's just me - you might it easier the other way!

I tied a bow with my Bow Easy and glued it on with fabric glue.  One thing that I really love about my Bow Easy is that when I have a ribbon that is patterned and clearly has a wrong side and a right side, when I tie the bow with my Bow Easy, the pattern remains uppermost - something I find difficult to achieve otherwise and it becomes a real fiddle twisting and turning the ribbon to get it right-side up (I am so bow-challenged!).

And I even did the inside (keeping my New Year's resolution of doing the insides of my card before I move onto the next card):-


Whoops - one of my little punched hearts is a little crooked!  Oh well!  The scalloped heart was diecut using my Spellbinder Scalloped Heart Nesties and Red Glitter cardstock (LOVE this stuff - can't you tell?!!!) and the pink heart with my Heart Nesties.  For the white cardstock heart:  the next-size-down Heart Nestie is much smaller and when I diecut my white cardstock, it looked a little silly as it made the pink cardstock have a very wide border, so I placed the same Heart Nestie I used to diecut the pink cardstock and traced around the inside of it onto my white cardstock and simply handcut it.  I just use nail scissors (they have a curved blade) which make is easier for cutting the rounded parts.  Then I simply stamped the sentiment and punched a couple of red hearts from my Carl CP-8 Heart duo punch and glued them on.

Challenges 

I'm popping this card into the following Challenges -

Allsorts Challenge Week 89 - Must be love, love, love
Saturday Challenge #120 - Valentine 
Splitcoaststampers 'Ways to use it' Challenge WT308 of 'i HEART you'

Well, that's about it from me - thanks again for stopping by!  Hope to see you again soon!

Jocelyn


Card Recipe:  

Stamps:  Penny Black 'Every which way' 30-008 clear stamp set

Ink:  Memento Tuxedo black

Designer paper:  Best Creations red glitter cardstock

Accessories:  Cuttlebug, Crafts Too Happy Valentine embossing folder, Spellbinder Heart and Scalloped Heart Nestabilities, Derwent Coloursoft pencils, Odourless Mineral Spirits, paper stumps, Kaisercolour chalk, I-Kan-dee pearlescent chalk, ribbon, Bow Easy, Cardstock:  KW Doggett 'Knight' white (for image), regular white (for card base), candy pink, soft red

Punches:  Carl CP-8 heart duo

Penny Black: Every which way - I will love you always, all ways


Hello blogging friends!  My desk has been a little hive of activity since I started playing with my new Penny Black: 'Every which way' stamp set that the postie brought me the other day.  I love this little set - such cute images.  I have long been admiring other people's cards made with Kraft Cardstock and thought I would try my hand at using it.  This was a very quick and simple card to make - perfect for your last-minute Valentines Day cards.

The Kraft cardstock was embossed with my Cuttlebug and Kimmy-Luvs embossing folder.  The dog was stamped onto white cardstock and coloured with OMS, Derwent Coloursoft and Prismacolor pencils.  I stamped the balloon part of the image again onto the back of my Best Creation red glitter cardstock, then cut the balloon out and glued it to the image.  I love how sparkly it looks.  The dog is popped up on 2mm mounts.  It's a good idea to use LOTS of them when you are popping an image onto embossed cardstock so that your image doesn't come unstuck and fall off (ie: less surface area for them to stick to).  I had that happen recently when a sentiment panel came unstuck after a few days when I was very frugal with my foam pads.

Here is closeup pic of the balloon - don't you just love the "sparkle"?!!


By the way, the little hairs and marks on the close-up are part of the cardstock - kinda looks like my card or my camera lens got all dusty!

For the sentiment panels:  as this sentiment is just one stamp and I wanted 2 separate lines, I masked the bottom line of the words off and stamped, then masked the top line off and stamped.  Here is a pic of the stamp set if I am not making sense:

Stamp Set Copyright Penny Black Stamps

I diecut the sentiments using one of the dies from my Spellbinders Tags Trio and popped them up on 1mm mounts.

To finish off, I tied some red and white Twine and punched a heart from the same red glitter cardstock and glued it to the centre.  I did add some Fray Stop to the ends of the twine to stop it from unravelling.  I think you could use this card for a Wedding Anniversary as well as for Valentines Day - and I think it could be used for either a lady or a man.

Challenges:

I am popping this card into the Splitcoaststampers Ways to use it Challenge WT308 of "i HEART you" where you have to use a heart anywhere on your project, as well as the monthly Sir Stampalot February Challenge of "All creatures great and small".

Thanks for stopping by!  I have a couple of other Valentines/Love cards on the go - watch this space!

Jocelyn


Card Recipe:

Stamps:  Penny Black - Every which way 30-008 clear set

Ink:  Memento Tuxedo black

Designer paper:  Best Creation red glitter 12" x 12" cardstock

Accessories:  Cuttlebug, Cuttlebug Kimmy-Luvs embossing folder, Spellbinder Tags Trio S3-147, red and white twine, Fray Stop, Odourless Mineral Spirits (OMS), Prismacolor + Derwent Coloursoft pencils, paper stumps, Cardstock:  American Crafts Kraft, KW Doggett Knight white

Punches:  Carl CP-8 Heart duo, Stampin' Up corner

Wedding Cards using LOTS of embossing folders!


Hi and thanks for stopping by!  Sorry I haven't blogged for a little while - some frustrating computer issues plus being school holidays here in Australia, I've been out and about quite alot (been to the beach - yay!) and had no uninterrupted "me" time.

Anyway..........I have been playing with my embossing folders as the Challenge #4 over at CropStop is  "Make a Good Impression" where you have to use 2 different patterns as embossing on your project.  I had had my eye on the Splitcoaststampers 'Free for All' F4A47 Challenge  of "Texturize me!" from about 2 weeks ago and you had to use 2 different embossing folders for a card for that challenge - but I never got a chance to play.  Thought it was a cool idea though (you know how much I LOVE my Cuttlebug!!).


ETA:  I just learned that the above card was picked as one of the Cream of the Crop cards from the challenge over at Crop Stop - and I get a special blinkie to add to my Blog.  How lovely!!  Thanks Crop Stop!  Woo Hoo!!


So while I was at it, I decided to combine it with the SCS Clean and Simple Challenge CAS103 of "Flourishes" and pop these cards into the SCS Fan Club January Challenge of "Love".  I can't give you any more details about the Fan Club Challenge as you have to be (paid) Fan Club Member of SCS - I am only allowed to reveal the "theme". 

For the card above, I embossed 2 separate pieces of cardstock:  one with the hearts embossing folder and the other with the Budding Vine folder (note I did have to run the hearts-embossed cardstock through my Cuttlebug twice so I could get the pattern on the cardstock to the width I wanted - I hope that makes sense!!).  I then trimmed the 2 pieces of cardstock down so that when I put them together, the hearts-embossed cardstock was about half the height of the Budding Vine-embossed cardstock - there was a slight overlay so that I could tape them together easily at the back.   To hide the join at the front, I glued a piece of white lace over the top.  That piece of lace is old shop stock from a Haberdashery business my parents ran in the 1970's - so is over 30 years old!  The embossed panels are up on foam tape so there is a bit of height between them and the cardstock base.

Then, because the CAS Challenge was "Flourishes", I decided to stamp the sentiment onto one of my Spellbinder Fancy Tags die (I thought it looked pretty "flourishy" to me!), and then diecut the 2 Vintage corners from my Vintage Die set as some "bonus" flourishes and popped all of these up on mounts.  After I stuck the Vintage corners on, I then thought maybe it looked "too much", but they ain't comin' off now 'cos it will rip the cardstock!  Oh well!  I punched a heart from some glittery red cardstock which I bought when I went to Bright on holidays last year - cool stuff if you can get it as the glitter is very well adhered and doesn't come off and make a glittery mess!! 

And here is the 2nd version which is also for the Fan Club Challenge:


For this version, I used the Lace Doily edge punch instead of the piece of lace, and added 2 ribbons:  the black/gold one with the red-sequin one over the top.  I also used 2 different embossing folders:  Textile and Swiss Dots, and added the black cardstock layer on the top of the white base.  I omitted the Vintage die corners as it just looked "too busy".  Note sure if you can see, but there is a Scor-Pal line above the punched border which made it easier to butt it up underneath the Textile embossing so as it would be straight.  Here is a close-up piccy of the 2 ribbons - the red sequined and gold/black ribbon is true to life as to what the colours are - the main photo doesn't show it very well :-(  I can tell you that it was sooooooo hard to take photos of (both) the cards to try and capture the red sparkle but not have the embossing look all washed out.


So there it is.  Go and have a play with your embossing folders and see what different combinations you can come up with - and then try adding in some different punched borders or lace or ribbon.   Once I worked out the design and what embossing folders I liked together, the cards were very quick to make.

Thanks again for visiting!

Jocelyn


Card Recipe:  

Card #1:

Stamps:  Sentiment from Stamp-It Australia set siset014 self-cling rubber (this is a large set of 13 different sentiments)

Ink:  Stazon Jet Black

Accessories:  Cuttlebug, Craft Concepts Budding Vine embossing folder, Hearts embossing folder from Cuttlebug emboss and die set "Love Language", Spellbinder Shapeabilities S4-235 Fancy Tags, Cuttlebug Vintage die set - fancy corner, white cotton lace, 1mm mounts (dimensionals), foam tape, cardstock:  white, red glittery

Punches:  Carl CP-8 heart duo, Stampin' Up corner

Card #2:

Stamps and Ink:  as above

Accessories:  Cuttlebug, Textile and Swiss dots embossing folders, Spellbinder Shapeabilities S4-235 Fancy Tags, 1mm mounts (dimensionals), Scor-Pal, Ribbon: gold/black, red sequin, cardstock: white, black, red glittery

Punches:  Carl CP-8 heart duo, Stampin' Up corner, Martha Stewart Lace Doily edge


Penny Black: It's for you and Nellie Snellen Doily Flower Multiframes




Hi and thanks for visiting my Blog :-)

I couldn't help myself - I had so much fun making my last Circle card, that I made another - except this one I made a top-opening card instead of a side-opening - and of course, it's a Valentine's card!  You can see my first circle card on my post HERE along with the instructions of how to make one. 

This very sweet and totally adorable puss is another Penny Black stamp (you know how much I LOVE my PB's), except that I didn't ink up the envelope portion of the stamp which is on the far left.

Image copyright Penny Black Stamps



I coloured the image with OMS and Derwent Coloursoft pencils, then lightly chalked around the image with blue Kaisercolour chalk, then added some pink I-Kandee Pealescent chalk here and there, and on the card that the cat is holding as well as some red Stickles to the hearts.

The lacey white cardstock was diecut with my Cuttlebug and NEW Nellie Snellen Doily Flower Multiframes (which also contain plain matching circle dies) - I used the biggest doily one on my card - and the image was diecut using one of the matching circles.   The Multiframes are available now at Fat Cat's Card Corner.  The pink cardstock was diecut using one of my Spellbinder Circle Nesties.

Did you notice the embossed texture on the red and pink cardstock?  I ran them both through my Cuttlebug using the Textile embossing folder.  I love how it adds some "lacey-ness" to the card to match the Doily Flower diecut.

The bow was made with my Bow Easy to which I glued a heart brad after cutting off the prongs (much easier than poking a hole to thread the prongs through!).

Now here is a photo of the same card, but with slight differences.  Can you spot them?  No?


Well, I wouldn't expect you to notice, but I ran the white cardstock Flower Lace Doily diecut through my Cuttlebug using the Textile embossing folder instead of the pink cardstock - I just wanted to see what it would look like to have the Lace Doily diecut embossed.  The other difference is that I sewed on a red heart to the ribbon - I couldn't find my red heart buttons when I made the first card (you know how us cardmakers lose stuff on our desk LOL.......!).  I'm not sure which card version I prefer - I like them both!

And here is a pic of both the card insides.  I added some tiny red hearts which are the leftover punchies from using my Arrows Border punch - I added red Stickles to them as well.    The first photo inside matches the first card, and the 2nd photo matches the 2nd card:



Challenges:

I am entering this card into the Penny Black at Allsorts January Challenge of "All you need is love" and they want to see your interpretation of that famous Beatles song.

And the Papertake Weekly Challenge where the first challenge of every month from now on will be "Anything Goes" plus an optional "extra" something  - and this particular Challenge has the optional extra of "Lace" which can be paper lace or fabric - but you don't have to have Lace if you don't want to. 


Thanks again for stopping by!  Thankfully, I seem to have sorted out my computer woes which had my computer in a constant state of re-booting after upgrading a program which corrupted - not fun :-(   Thank goodness for the 'System Restore' feature in Windows XP!!  Takes so much time to "fix" a computer when I would rather be cardmaking!!  Hope to see you again soon!

Jocelyn


Card Recipe:

Stamps:  Penny Black "It's from you" PB-2859J wood-mounted, Sentiment: from Wendy Irving Expressions J6412.02 clear set

Ink:  Memento Tuxedo black

Accessories:  Cuttlebug, Nellie Snellen Doily Flower Multiframes MFD020, Spellbinder Circle Nestabilities, Cuttlebug Textile embossing folder, Odourless Mineral Spirits (OMS), Derwent Coloursoft pencils, paper stumps, Christmas red stickles, Kaisercolour blue chalk, I-Kan-dee Pearlescent chalk, ribbon, Bow Easy, heart brad/button, Cardstock: soft red, pink, KW Doggett "Knight" white

Punches:  EK Success Arrows border

Penny Black dog with rose and NEW Nellie Snellen Doily Flower Multiframes


Hi and a HAPPY NEW YEAR to you all!  Did you make any New Year Resolutions?  I made one - and that is to "do the insides of my cards before I move onto the next card"!!  Are you like me, and once you do the front of the card, you leave the inside for "later on"?   And, then I often seem to smudge the inside sentiment because I am in such a hurry, or I stamp it upside down or crookedly!   UGGH!!   I hadn't done any of the insides of my Christmas cards last year so I had this last-minute rush to do them - but not this year - and so far, with the cards I have made (even though they are not Christmas cards), I have done the insides! Yay me!

Anyway, I am so happy that you stopped by, because I have some gorgeous new Nellie Snellen Flower Multiframe dies to show you.  You can find them HERE at Fat Cat's Card Corner.  Aren't they just so pretty?  Just like a lace doily.  There are 3 lacey dies and 3 matching plain circles in the set.  You use the same sandwich in your Cuttlebug as for Spellbinder Nestabilities, ie: A Plate, C Plate, Die face up, cardstock, B Plate. 

For my card, I decided to make a Circle Card using my Spellbinder Large Circle Nesties.  You simple fold a piece of cardstock in half, and line up the Circle Nestie just near the fold of the card - see this pic:


And run it through your Cuttlebug using the usual A, C and B plate combo for Spellbinder dies - and yes, it DOES cut through the 2 layers of cardstock - it's just regular cardstock - nothing special - but you should always check your own machine and NEVER EVER force a sandwich through if it feels very tight.  Here is an extra-close-up piccy:


Hey, I just realised the background looks like a swimming pool full of water!  But it's just my glass-topped table on our decking.  I had to take the photo there because it was over 40degC outside (about 104degF) with a blistering hot north wind, so I couldn't take my photos in my usual place because my Nestie/cardstock would have blown away!

You can diecut any shaped card with your Dies - and it's really nice to make something different other than a square or rectangle-shaped card.  Go on - have a play!!

This cute little dog is from a Penny Black Clear Set called "Critter Party" and was coloured with Derwent Coloursoft Pencils and OMS.   I chalked the blue sky background and added some pink Pearlescent I-Kan-dee chalk here and there - which isn't picked up by the camera but adds a gorgeous shimmer and is so pretty IRL.   The sentiment is from a retired Elzybells Spring Cubes clear set and I added a tiny pink rhinestone either side of it.  I added some Cotton Candy Stickles to the rose and the dog's cheeks, plus the tiny pink hearts which are the leftover punchies from using my Arrows Border punch.  This panel was diecut with the circle die from the Multiframes set, and the pink circle was diecut with my Spellbinder Circle Nesties.

The bow was made with my Bow Easy - which Fat Cat's now have in stock.  Lastly, I sewed on the button, then glued the ribbon to the card using Fabric glue.

Are you ready for a pic of the inside?  Yes, I really did the inside of the card!


This sentiment is another retired Elzybells rubber stamp - wish Elzybells was still around :-(

Thanks for stopping by!   Have you made any New Year Crafting/Cardmaking Resolutions?  Drop me a comment - I'd love to hear from you!

I'll be back when I can with another card - being Summer holidays here, my posting will not be as regular plus I am having some computer issues whilst I have been upgrading my computer which is eating into my free-time (very frustrating!!).   Hope to see you again soon!

Jocelyn


Card Recipe:

Stamps:  Dog with rose - Penny Black "Critter Party" clear set 
              Sentiment (card front):  Elzybells Spring Cubes 20-015-CC clear set
              Sentiment (card inside):  Elzybells "A beautiful day" rubber stamp

Ink:  Memento Tuxedo black

Accessories:  Cuttlebug, Spellbinder Circle Nestabilities, Nellie Snellen Doily Flower Multiframes MFD020, Derwent Coloursoft pencils, OMS, paper stumps, Kaisercolour blue chalk, I-Kan-dee Pearlescent chalk, Cotton Candy (pink) Stickles, pink rhinestones, gingham ribbon, Bow Easy, heart button, pink sewing thread, Cardstock:  brown, pink, KW Doggett Knight White

Punches:  EK Success Arrows Border punch